Riding a wave with your body is an extraordinary experience. It's just you and the ocean. However, you can hardly do it without swim fins especially designed for bodysurfers.
There are notable differences between bodyboarding fins and bodysurfing fins. Some might think you won't notice the difference between both fin models, but that isn't absolutely exact.
Swim fins for bodysurfing should be comfortable and perfectly fit the rider's feet. On the other hand, you don't want them to be too big and too loose.
The modern molded rubber materials are lightweight and will adapt to small, medium, and large feet.
Comfort, Thrust, and Durability
Poor quality swim fins will hurt your feet, toes, Achilles tendons, ankles, and calf muscles. Some of them will even cut your feet and wetsuit or let sand in.
That is why it is critical to learn how to choose bodysurfing fins.
The bodysurf fins should also float. If for any reason, you lose a fin in the water, floating models will ensure you're safe, and you won't need to buy another pair.
Remember that, in bodysurfing, fins are a natural extension of your body.
Swim fins for bodysurfers have a few tweaks in design, too. For example, they're really compact, and a few models have no right or left foot difference.
Additionally, you need them to swim underwater and work in real-time with the wave as you draw the surf line with your whole body.
DaFin Swim Pro
DaFin is one of the most respected swim fins in the bodysurfing market.
Created by Andy Cochran in Hawaii, it is the only swim fin endorsed by the United States Lifesaving Association.
The Churchill Makapuu are probably the most popular swim fins in the world.
They provide power and acceleration, including a drain hole and stiffer rubber on the blade for more kick power.
Hydro Tech 2
The Hydro Tech 2 swim fins have been specifically designed to be molded in silicone instead of rubber.
They promise not to cause blisters, they're UV proof and have minimal resistance to kick action.
Kpaloa is one of the iconic bodysurfing fin manufacturers. The original rubber model has hydrodynamically designed for surface leg kicks and will provide you with all the flexibility, hardness, and density you need for your water sessions.
Three drainage holes were strategically located to deliver maximum efficiency, avoid braking forces, and allow debris to flow.
The Viper V-5 swim fins need no introduction. It is designed to be an all-purpose fin for both bodyboarding and bodysurfing.
It has a five-inch blade with vertical side rails slanted down to a narrow tip.
Mike Stewart Viper Flex
The Mike Stewart Viper Flex swim fins offer the same design as the yellow-dot MS Vipers, but they're made with softer rubber compounds.
The delta tail design enhances control and minimizes drag.
The Viper V-7 swim fins are a popular model with full-length raised side rails for maximum power and thrust.
Their large blades make them a great pair of fins for big wave bodysurfing.
Voit Duck Feet
The Voit Duck Feet swim fins are a legendary model constructed from dual-density rubber.
They were developed in 1953 and have remained symmetrical in all propulsive planes. Get instant response, thrust, and greater propulsion with minimum effort.
The Ally ERS4 swim fins feature a v-thermal ankle strap for locked-in comfort.
They float in salt water and have been designed to walk on slippery surfaces. In addition, drainage exit holes provide an easy exit for sand and gravel.
DaFin Mark Cunningham
Australian bodysurfing pioneer Andy Cochran developed the swim fin model with inputs from world-renowned watermen Mark Cunningham and Brian Keaulana.
It's a very comfortable and robust pair of swim fins with no difference between left or right foot.
The swim fins for bodysurfers review has been updated on November 26, 2021.